### How many amps can an extension cord handle?

## How many amps can an extension cord handle?

Be sure the extension cord is fully seated into the socket before you connect anything to it; however, never force an extension cord into a socket where it does not fit. The best extension cords for smaller RVs are usually 30 amps while larger ones can require 50 amps.

### Can an extension cord handle 20 amps?

To properly size an extension cord so your equipment is getting enough power, consider the distance you will run the cord and the amps that your equipment needs to run (found on cord). When using 100 feet extension cords, you’ll need a: 10 Gauge for 16-20 Amps.

#### Can you use a 30 amp extension cord?

The actual answer is: “there is no maximum, as long as it is rated for 30 amps”. The question should be not how many feet, but how many cords. A 100 ft extension cord rated for 30 amps is not the same, at all, as two 50 foot 30 amp extension cords.

**Do extension cords have different power?**

As the cord gets longer, the current carrying capacity of the cord gets lower. For example, a 16 gauge extension cord less than 50 feet in length can power a 1625 watt (W) appliance. A 16 gauge cord that is longer than 50 feet in length can only power an appliance up to 1250W.

**Can 12 gauge wire handle 30 amps?**

RULES OF THUMB “Twelve-gauge wire is good for 20 amps, 10-gauge wire is good for 30 amps, 8-gauge is good for 40 amps, and 6-gauge is good for 55 amps,” and “The circuit breaker or fuse is always sized to protect the conductor [wire].”

## How far can you run a 30 amp extension cord?

As long as it’s rated for 30 amps, there is no maximum distance. The question should not be how many feet, but how many cords. For example, two 50 foot, 30 Amp extension cords should be considered to have less capacity than one 100 foot extension cord.

### Which is better 12 or 16 gauge extension cord?

16-Gauge Cords: Any 16-gauge cord between 0 and 100 feet long will adequately handle tool loads up to 10 amps. 12-Gauge Cords: If your tool load is between 10 and 15 amps and the length of the cord is 50 to 100 feet, you need a 12-gauge cord to safely power any tool. This is a great extension cord for many purposes.

#### Can a 10-gauge extension cord handle 30 amps?

That’s why you really need at least a 10-gauge extension cord for any 30-amp circuit. As you can see from the chart above, it’s rated for 30 amperes of current so it will have much less voltage drop (easily half as much as a 14 gauge cable with the same current).

**Does an extension cord use power if nothing is plugged into it?**

Extension Cords Some cords do suck vampire power even when nothing is plugged into them. Extension cords are an exception. Cell phone charger cords are an example of a cord that does draw power even when it is not plugged into the phone. If it is warm, it is likely using power.

**Can an extension cord be too big?**

The thicker the copper wire, the more electricity it can carry. However, because transmitted power diminishes over distance, longer extension cords require heavier wire to deliver the full current rating required by an appliance. The wire can never be too big, but it can be too small.

## What are the amps for an extension cord?

This is for safety, to prevent overheating the cord. The limits for common cords are given in the chart below: Maximum amps for extension cords Copper wire size (AWG) Single-phase 2-wire and 3-wire cords Three-phase cords (motors and similar loads) 16 13 amps 10 amps 14 18 amps 15 amps 12 25 amps 20 amps 10 30 amps 25 amps

### What should you never plug into an extension cord?

Things you should never plug into an extension cord: Hair Dryers – Hair dryers typically draw 15 amps, which can cause an extension cord to get hot enough to start a fire. Irons – Heat-producing appliances like irons, draw at least 10-12 amps of current, which is beyond the limits of most indoor extension cords.

#### Can a 50 foot extension cord be used with a 16 AWG cord?

To get the same load rating with a 50-foot cord, the cord must have larger, 16 AWG wire. Because of the voltage drop, it’s best to use the shortest extension cord possible for the job at hand. Continue to 4 of 7 below.

**Can a garage light be plugged into an extension cord?**

Yes, other things, like a garage light, or some other appliance could be on the same circuit you’ve plugged the extension cord into. This adds to the total load on the circuit! You may think you have 15 amps available going to your extension cord, but several of those amps might be in use from something else.